All custom heights available on request.
On request all ejection rubbers are also available with self-adhesive and as a strip product.
Speed-Eject
- Hardness (Shore A): 15° | 20° | 25° | 30° | 35° | 40° | 45° | 50°
- Skin one side
- Extreme wear resistance → no intermediate maintenance necessary
- Higher speeds during diecutting possible
- SU: 2 plates à 500 x 1000 mm
Speed X
- Hardness (Shore A): 15° | 25° | 35°
- The right hardness at a glance through color coding
- Diecutting pressure reduction & minimization of disturbing impressions
- Less nicks & faster sheet travel
- Raw material EVA → UV-resistant & long-lasting
- SU: 2 plates à 500 x 1000 mm
Open Cell Sponge Rubber
- Hardness (Shore A): 15° | 25° | 35°
- Skin one side
- Colour: black or grey
- SU: 1000 x 1000 mm
Closed Cell Rubber
- Hardness (Shore A): 15° (without skin) | 20° (skin one side) | 25°
- Raw material base: NR / SB
- Without skin or skin one side
- Colour: black
- SU: 1000 x 1000 mm
Closed Cell Rubber R
- Hardness (Shore A): 20°
- Without Skin
- Colour: grey or red
- SU: 1000 x 1000 mm
Closed Cell Rubber / Closed Cell Gas Blown EPDM
- Hardness (Shore A): 15° (without skin) | 20° (skin one side)
- Without skin or skin one side
- Application especially in the processing of corrugated board
- Colour: black
- SU: 500 x 1000 mm
Closed Cell Gas Blown Neoprene – Rotary Rubber
- Hardness (Shore A): 15° (without skin) | 20° (skin one side)
- Without skin or skin one side
- Colour: grey, black or red
- SU: 500 x 1000 mm
Vulcan
- Density (RG): 35 | 45/50 | 60/65
- Colour: sand
- Large plates for special use on water jet machines
- SU: 250 x 500 mm | 500 x 500 mm | 750 x 550 mm
Ultra Stripping Foam
- Density (RG): 40 | 50
- Colour: white or yellow
- SU: 1000 x 1000 mm
- Service: cutting into cubes
Cork
- Hardness (Shore A): 65°
- SU: 990 x 640 mm
