All customized heights and widths available on request.
Application: Cutting Rules
Sprint Profile
- Hardness (Shore A): 70°
- 100% UV-resistant and very durable (> 1.5 million die-cuts) → less nicks and reduced dust
- Constant ejection force at high speeds and conditions
- Excellent abrasion resistance
- Narrow profiles are available for small spaces
- Colour: white
- Variants:
- Width: 3 mm | 5 mm | 8 mm
- Trapezoid or bevelled
Cork Profile
- Hardness (Shore A): 65°
- Variants: quarter round or with spacer
Trapezoidal Profile
- Hardness (Shore A): 20° | 35°
- Die-cutting material is fixed directly to the cutting rule → prevents tearing of the nicks
Vulcan Profile – rounded
- Density (RG): 35 | 45 | 50 | 65
- Variants: quarter round or with spacer
Euro Rubba D
- Hardness (Shore A): 50°
- Especially for use at glue flaps
- All sizes are also available as narrow strips
C-Profile
- Hardness (Shore A): 60°
- Variant: Trapezoid
Soft C-Profile
- Hardness (Shore A): 25°
- Trapezoid with spacer for plywood
- Material is compressed directly at the cutting edge → No tearing of the ceiling
- Application mostly with corrugated board
- Colour: red
Application: Creasing Rules
Cushion Crease
- Hardness (Shore A): 60°
- Creasing rubber with high wear and height resistance
- Colour: black with colour coding for safe detection of heights
Easy Crease
- Hardness (Shore A): 60°
- Reduces the tearing of corrugated board
G-Profile
- Hardness (Shore A): 70°
- Reduces problems when creasing corrugated board with high recycled content and short fibers
B2-Profile Rubber – Triangle Wedge
- Hardness (Shore A): 60°
- Variants: 7,0 x 12,5 mm | 7,5 x 12,5 mm
C3 Profile Rubber – 2 mm distance
- Hardness (Shore A): 60°
- For perfect creasing with creasing matrices
- 7 x 12,5 mm
D4 Profile Rubber – Bore
- Hardness (Shore A): 60°
- For complicated creasing
- Width: 25 mm
Vulko Crease
- Density (RG): 45/50
- Width: 20 mm
Application: Perforating and Cut-Creasing
A1 Profile Rubber – Triangle Wedge
- Hardness (Shore A): 60°
- Variants:
- With pinch chamfer or with spouting tip
- 10 x 10 mm | 8 x 10,5 mm
D5 Profile for Cut-Crease
- Hardness (Shore A): 75°
- Ensures clean and exact cut edges
- Beveled at the top
- Width: 3 mm | 5 mm | 10 mm